Size Name:Scissor Jack
The scissor jack, with tooth gears, can extend from 90mm(close position) to 360mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle.
Condition: Brand new
Minimum height: about 105MM
Maximum height: approximately 385MM
Lifting: 2.0T
Material: Steel
Net weight: 2.1KG
Color: Black
Material: Steel
Included: Chromed Crank Speed Handle
Item Size: 35*8.5*8.5 (L×W×T)
Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles.
Packing include:
Scissor jack * 1
Handle * 1
HEIGHT/CAPACITY CURVE
This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.
Before Use:
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.
OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
CARE AND MAINTENANCE:
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.
The scissor jack, with tooth gears, can extend from 90mm(close position) to 360mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle.
Condition: Brand new
Minimum height: about 105MM
Maximum height: approximately 385MM
Lifting: 2.0T
Material: Steel
Net weight: 2.1KG
Color: Black
Material: Steel
Included: Chromed Crank Speed Handle
Item Size: 35*8.5*8.5 (L×W×T)
: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles.
Packing include:
Scissor jack * 1
Handle * 1
HEIGHT/CAPACITY CURVE
This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.
Before Use:
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.
OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
CARE AND MAINTENANCE:
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.
desertcart is the best online shopping platform where you can buy 2 Tonne Rustproof Car Scissor Floor Lift Car Jacks with Speed Chromed Crank Handle for Vauxhall/Corsa/Astra/Zafira/Insignia/Meriva(4.2-15 Inch)/for Audi A3 A4 A5 Q3 Cars, Solid Steel Rust-Proof from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
desertcart ships the 2 Tonne Rustproof Car Scissor Floor Lift Car Jacks with Speed Chromed Crank Handle for Vauxhall/Corsa/Astra/Zafira/Insignia/Meriva(4.2-15 Inch)/for Audi A3 A4 A5 Q3 Cars, Solid Steel Rust-Proof to Stockholm, Gothenburg, Malmo, Uppsala, Vasterasand more cities in Sweden. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the 2 Tonne Rustproof Car Scissor Floor Lift Car Jacks with Speed Chromed Crank Handle for Vauxhall/Corsa/Astra/Zafira/Insignia/Meriva(4.2-15 Inch)/for Audi A3 A4 A5 Q3 Cars, Solid Steel Rust-Proof speedily without the hassle of shipping, customs or duties.
desertcart buys 2 Tonne Rustproof Car Scissor Floor Lift Car Jacks with Speed Chromed Crank Handle for Vauxhall/Corsa/Astra/Zafira/Insignia/Meriva(4.2-15 Inch)/for Audi A3 A4 A5 Q3 Cars, Solid Steel Rust-Proof directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.
Yes, it is absolutely safe to buy 2 Tonne Rustproof Car Scissor Floor Lift Car Jacks with Speed Chromed Crank Handle for Vauxhall/Corsa/Astra/Zafira/Insignia/Meriva(4.2-15 Inch)/for Audi A3 A4 A5 Q3 Cars, Solid Steel Rust-Proof from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.